Automatic Box Bottom Inserting Plate Wrapping Machine 

Before the full-automatic board inserting machine is put into operation, check whether each working position is properly adjusted. The parts to be lubricated shall be filled with lubricating grease in advance. So you know how to solve the problem of the machine? Whether the tension of the coiling shaft is too tight or closely related to the glue during gluing when the coiled finished products run off. The meter counting is not accurate. In case of this problem, the two wheels of the meter wheel can contact the feeding rubber roller at the same time, and make a mark on the meter wheel, hand swing 5 circles to count 1 meter, otherwise replace the meter. When the intermediate of semi-finished products is loose, it is closely related to uneven gluing and uneven substrate. At this time, adjust the bow roll to flatten it, or increase the tension of the winding shaft and compact the substrate with a knife tube. When the semi-finished products are wrinkled during winding, the pressure o…

Lighter supporting facilities Windproof lighter Electronic lighter Lighter manufacturing machine