Gold-plated IDC socket Box Header Connector 

Product name Gold-plated IDC socket Box Header Connector Product Introduction A simple cow is usually a square plastic socket and a number of neatly arranged square needles. The difference between the simple bull connector and the horn connector is that the simple bull connector has two side buckles removed. According to the demand, the outer size of the simple bull connector is commonly used with 1.27 spacing, 2.0 spacing, 2.54 spacing three specifications; Depending on the spacing, the diameter of the square row needle used is changed accordingly. The bottom contact surface with the PCB board can be designed as SMT (as shown in Figure 1) or DIP in-line 180 degrees. Function: After the simple ox is welded on the PCB board, it is connected to the IDC wire of the corresponding specification, and then it is connected to another circuit to form the circuit connection mode required by the designer. Usually used to transmit control signals and weak currents.…

Ejector Header Connector Box Header Connector Female Header Pin Header